Connect Microphone To Speakers
Then connect the adapter cable’s 3.5 mm mini-plug to the powered speakers’ Line Level. input.Note: The input on your powered speakers may be identified by various labels, including AUX, Input, and iPod. Line of sight game download. Setup #3 – 3.5 mm (male) input on powered speakers. Connect the RCA (red and white) plugs from the turntable cable to the included RCA to 3.5 mm (1/8″) mini-plug (female) adapter cable. The larger plug on the bottom is a quarter-inch (diameter) plug. A speaker or microphone with this type of plug would normally connect to a stereo amplifier. You may be able to find an adapter that will make it compatible with your computer, but you should consider purchasing a speaker or microphone with the correct type of plug.
Mic Speaker Combo
Better create R2 switchable or variable with 1k being the top restriction. But the simple approach can be probably Alright.Speaker indicators are relatively high voltage and relatively reduced impedance (meaning they can provide a lot of present).
What that indicates is dependent on the loudspeaker; anything from a few of volts and a fraction of an amp (complete strength 0.25 w or therefore) for a little media speaker up to tens of hundreds of w for an Air conditioning unit/DC gig.Microphones are usually delicate devices delivering millivolts into a higher impedance insight (reduced current, quite low power).So you need to attenuate the loudspeaker result (reduce the voltage) to prevent overloading the microphone insight.